Skip to content

Control Robot

The take_action function in _base_task is used to control actions during task execution. It accepts two parameters: action and action_type.

1. Supported Action Types

The parameter action_type supports two modes:

  • qpos (Joint Position Control) — default
  • ee (End-Effector Pose Control)

Depending on the selected mode, the format and dimension of the input action will differ.

1.1 qpos Mode (Joint Position Control)

In qpos mode, the action is defined as:

[left_arm_joints + left_gripper + right_arm_joints + right_gripper]
  • The specific dimension of the action depends on the robotic arm configuration.
  • The system will automatically adjust the input dimensions during deployment to match the specific robot configuration.

1.2 ee Mode (End-Effector Pose Control)

In ee mode, the action is defined as:

[left_end_effector_pose (xyz + quaternion) + left_gripper + right_end_effector_pose + right_gripper]
  • The dimension is fixed, regardless of the robot configuration.

2. Deployment Example

You can find a demonstration of usage in:

policy/Your_Policy/deploy_policy.py

This file provides a sample implementation to help you understand how to use the take_action function with different action_type settings during deployment.